Hot-dip Galvanizing Mesh Cable Tray

Product Detail

Cable trays are used typically as raceways for cables and wires. A cable tray system supports and protects both power and signal cables and allows cabling networks to be upgraded, reconfigured, or relocated. Cable tray systems can have several designs, including ladder, solid bottom, channel, trough, wire mesh, and single rail.

A wire mesh cable tray provides a field-adaptable system for low voltage, telecommunication and fiber optic cables. The amount of cable tray wire that can be installed in a cable tray varies with the type of cable (e.g., twisted pair, coaxial, and fiber optic).

Considerations for cable trays include environmental conditions (ice, wind, snow,), corrosion requirements, and weight of the installed cable. Other considerations for cable trays include the type and number of cables to support, the bending radius of the cable, able entry / exit freedom, installation design, expandability, heat generated, and length of support spans.

Wire Mesh Cable Tray Specifications:

Material: Carbon Steel

Min Yield: 500 MPa

Min Tensile: 530 MPa

Typical Wire Diameter: 5 mm (get little bit bigger after HDG) 

Customize Optional Specs:

Mesh configuration size.

Material grade: steel tensile strength.

Surface finish type and coating thickness.

Wire diameter from 4.0mm to 6.0mm

Width from 50mm to 900mm

Depth from 25mm to 150mm

Above cable tray dimensions are all internal.